Rose backplate — Installation video
Full fitting walkthrough for the Breeze with the rose backplate.
Product support
Breeze (No App Version)
Manuals, installation help, product details, videos, and answers for your Blusafe product.
Watch first
Installation videos
Pick the video that matches your backplate style. The fitting is identical to the app edition shown — skip the app setup steps, as this version works without the app.
Long backplate — Installation video
Full fitting walkthrough for the Breeze with the long backplate.
Downloads
Product manuals
PDF document
Breeze Manual (V2023.1.1)
Open manualMore help
Community videos
Answers
Frequently asked questions
The handle is stuck after changing direction. What should I do?
Try loosening the M16 nut that secures the handle slightly to see if it returns to normal operation.
What causes the battery to drain quickly?
Using different brands or mixing old and new batteries. Always use new batteries of the same brand.
Ensure batteries are from formal channels.
Confirm the batteries are installed with the correct polarity (+/-).
While an indoor lock, check for any unusual moisture infiltration.
How many administrators can be registered?
The first three registered users are set as administrators. For optimal management, it is recommended to register all three.
Why does fingerprint verification fail immediately after successful registration?
After successfully registering a fingerprint, you must wait for the indicator light to turn off completely before attempting to unlock the lock.
How do I delete all fingerprints?
Use the setting needle to press and hold the set button for 8 seconds until you hear a double beep and the LED lights blue.
Release the button and press the sensor with a registered ADMIN fingerprint.
A long beep and green LED confirms all fingerprint data has been deleted and the handle is reset. A red LED means the ADMIN fingerprint was not recognized; please try again.
How do I add a new user fingerprint?
An ADMIN fingerprint is required to authorize new registrations. We recommend registering at least 3 fingerprints as a backup.
Step 1: Use the setting needle (K) to press the set button once (located inside the handle end). You will hear one beep and see a blue LED.
Step 2: Press the sensor with a registered ADMIN fingerprint. A long beep and green flashing LED (turning blue) indicates authorization is ready. A triple beep and LED off means authorization failed; restart from Step 1.
Step 3: To register the new USER fingerprint, briefly place the finger on the sensor and remove it upon hearing a double beep. Repeat this "touch and remove" process three more times until the LED turns green, indicating successful registration. For best results, press your finger in slightly different positions each time.
What should I do if fingerprint recognition is occasionally unsuccessful?
Ensure your finger and the sensor are clean.
Place your finger correctly on the sensor and try multiple times.
When registering, scan the same fingerprint from different angles, or register multiple fingerprints from different fingers.
Is the fingerprint sensor waterproof and fog-proof?
No. The Breeze is designed as an indoor lock and does not feature waterproof or fog-proof capabilities.
How many fingerprints can be stored in the lock?
The lock can store up to 50 fingerprints.
Identify your product
Serial number location
Breeze (No App Version)
Technical information
Product details
Installation
- Backset
- 60/70mm backset
- Door Thickness
- 35-45mm
- Lock Type
- Latch
Specifications
- Mechanical Keys
- 2 pcs
- Standard
- FCC
- Emergency power
- Micro USB
- Battery Type
- 4 x AAA Alkaline batteries
- Battery Life
- ＞ 6 months
- Fingerprint
- 50
- Material
- Zinc alloy
- Operating Temperature
- -25℃ ~ 75℃/-13℉ ~ 167℉
- Waterproof
- IP54
Blusafe U.S. support
Still need help with Breeze (No App Version)?
Send the model, serial number, order number, and a short description of the issue. Photos are welcome.
Contact support Back to support center